TC electronic flashback delay 的toneprint

本文由 jason786242012-09-19 發表於 "效果器、Amp、DIY" 討論區

  1. jason78624

    jason78624 Member

    註冊日期:
    2008-02-22
    文章:
    48
    讚:
    0
    想請問有用過這顆的朋友
    我想下載自己喜歡的樂手的音色到效果器裡
    有去官網下載了音色
    可是用usb接上電腦和效果器之後
    電腦有搜尋到外接裝置
    但是也沒跑出什麼東西來= =
    什麼都不能點= =
    是有限定要mac的電腦嗎?
    我是用windows的= =
    還是說要去官網下載什麼特定程式之類的?

    感謝~
     
  2. EIRA

    EIRA New Member

    註冊日期:
    2012-08-29
    文章:
    63
    讚:
    0
    http://www.tcelectronic.com/flashback-software.asp

    1. Unplug all cables from the pedal.
    2. Remove the battery.
    3. Connect the pedal to a PC or Mac with the USB cable.
    4. Press and hold the footswitch on the pedal.
    5. Insert a DC plug with 9V/100mA power supply.
    6. Check that the LED on the pedal turns on with green light.
    7. Release the footswitch.

    Now your PC or Mac will recognize the pedal which is ready to receive a new firmware:

    8. Launch the firmware update application.
    9. (STEP1) Select the pedal in the combo box.
    10. (STEP2) Press the update button when it turns green.
    11. Wait for the progress bar to reach 100% and for the pedal to automatically restart.

    Note: You should select "USB Audio Device", if you use Windows XP.
     

分享此頁面