各位可以説一下 Axe Fx2 XL+新加入那些功能呢? 對音質的影响大嗎？ 因為本身已經有Fx2想説值得升級嗎? 我常用於interface 錄音及Return入音箱的.play metal cora, nu metal類型 謝謝各位！~
官網不是有寫? http://www.fractalaudio.com/p-axe-fx-ii-preamp-fx-processor.php Axe-Fx II (original) - Dual TigerSHARC, 384 presets, 100 User Cab Slots, RJ45 MFC-101 port, Mechanical main encoder, MIDI IN and OUT/THRU jacks, Single "Pedal" jack, 60mm fan. Axe-Fx II Mark II - EtherCON port for connecting MFC-101. 60 or 80mm fan Axe-Fx II XL - As above, but upgraded as noted: memory Increase to 768 presets, 500 User Cab Slots, EtherCON and FASLINK connectors, optical main encoder, dedicated MIDI THRU, lower noise floor, 80mm fan. "Secret Sauce III" input circuitry, flash ROM preset storage, built-in recovery firmware, dual onboard Expression Pedal jacks, "XL only" firmware features (such as XY on a greater number of blocks.) Axe-Fx II XL Plus - All of the above, plus a brighter sharper display, and an even lower noise floor. 跟XL比就換個銳利一點的螢幕、然後底噪更低一點，跟FX II比是多比較很多東西啦...不過好像沒甚麼跟音質有關的。
XL 對我來說，最重要的是Hardware based MIDI TRHU， 之前的版本，MIDI Thru 都是 Software based，也就是 MIDI In 先進到 Processor 處理過後，再由 MIDI Thru送出 差別為何？Software Based 會造成額外的 Latency，當設備一多，一組音色訊號包含多組 MIDI 訊號，分送到不同設備時 若 FX II 是這個 MIDI Daisy Chain 中的同一個的話(通常都是)，就會造成接在後方的那些設備切換較慢 Fractal Audio 給的 Solution 只有兩個： 1. 換成 XL (開什麼玩笑!) 2. 用 MIDI Splitter/Patcher 來分配訊號，降低 Latency