Gibson粉絲俱樂部

本文由 內建CD-Pro2的Gibson2006-02-11 發表於 "吉他俱樂部" 討論區

  1. jim39jim39

    jim39jim39 Member

    註冊日期:
    2008-08-22
    文章:
    261
    讚:
    0
    難道是吉他版正火熱的水淹gibson?!










    隨口說說請大大節哀
     
  2. 音符寶寶

    音符寶寶 New Member

    註冊日期:
    2008-06-20
    文章:
    43
    讚:
    0

    ....我這把2009的耶...難道2009也淹大水>O<
    ...誰能告訴我 我的GIBSON是怎樣了....是瞎疵品嗎??
     
  3. I'M JW

    I'M JW Member

    註冊日期:
    2010-05-21
    文章:
    116
    讚:
    0
    淹大水不是'10年春季的事情嗎~~~

    我想應該是環境問題
    裂掉要不就太濕太乾

    太濕機率比較高~~~
    不然撞到應該不是撞成這款的
    小弟淺見
     
  4. 音符寶寶

    音符寶寶 New Member

    註冊日期:
    2008-06-20
    文章:
    43
    讚:
    0
    那要讓他一直這樣嗎...我該怎麼做才好= =
     
  5. Vudo

    Vudo Member

    註冊日期:
    2001-09-04
    文章:
    160
    讚:
    9
    從那個裂痕的位置看來, 有可能是兩片木頭的黏接交界, 也就是 核桃木 跟 楓木 連接的交界, 熱漲冷縮, 兩種木頭的密度不同, 所以膨脹率就不同, 一般而言, 不要讓琴 突然 忽冷忽熱(如琴在大熱天的高溫下放置了一陣子, 突然把琴拿進溫度很涼快的冷氣房), 應該是不會有這種情形發生才對啊.

    若真的擔心的話, 就找 專業技師 看看吧.
     
  6. 達摩

    達摩 Active Member

    註冊日期:
    2002-02-25
    文章:
    2,823
    讚:
    1
    不用管它, 繼續彈吧.
     
  7. 音符寶寶

    音符寶寶 New Member

    註冊日期:
    2008-06-20
    文章:
    43
    讚:
    0

    恩...我練了一段時間感覺很熱...就開冷氣繼續練..練完要擦拭他的時後就發現了..如果照達摩兄說的 不要管他...那他會越裂越大或是引響音色之類的問題嗎??

    拿去給樂器店弄的回跟原來一樣嗎??
     
  8. vicc

    vicc Member

    註冊日期:
    2004-11-11
    文章:
    253
    讚:
    0
    不至於影響音色,可以拿去給師傅看看,基本上不用錢。
     
  9. 馬丁小羅

    馬丁小羅 Member

    註冊日期:
    2002-05-20
    文章:
    125
    讚:
    0
    我有一把木吉他J-185EC也裂的更嚴重
    在琴頸跟指板的交界處裂開,很多Gibson都會這樣
    時間早晚而已,你就安心彈吧,越處理會越糟糕......:D
     
  10. I'M JW

    I'M JW Member

    註冊日期:
    2010-05-21
    文章:
    116
    讚:
    0
    琴就是會越用越舊.
    現在想好好保養還來得及.
     
  11. marcofreda

    marcofreda New Member

    註冊日期:
    2010-10-12
    文章:
    12
    讚:
    0
    最近沒什麼人氣, 我來加入一下吧.

    這是最近買的二手Gibson Les Paul Standard Ebony Color, 01年的琴, 也是我第一把Gibson, 我比較喜歡黑色的Gibson, 酷的啦...
    是在日本Yahoo拍賣上標到的.....

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
  12. zerglisk

    zerglisk New Member

    註冊日期:
    2009-02-16
    文章:
    653
    讚:
    1
    恭喜買到愛琴, 可惜圖無法放大, 呵呵
    我也愛黑色Gibson~
     
  13. marcofreda

    marcofreda New Member

    註冊日期:
    2010-10-12
    文章:
    12
    讚:
    0
    大家的前後段拾音器各離弦多少距離呢?

    各位好, 我這問題有在吉它版po, 但沒有人回應這個數據.
    我會問的原因是前段的聲音比後段聲音大多了, 當然是指都開到十的狀況, 且發現後段的距離比前段還遠, 跟我看過的琴都相反了,
    所以想問一下大家琴的狀況是如何呢? 還是有知道原廠的是多少呢?

    謝謝.
     
  14. Kosain0

    Kosain0 Member

    註冊日期:
    2004-10-01
    文章:
    52
    讚:
    0
    bridge 1/16
    neck 3/32(吋)
    再依個人喜好調整
     
  15. marcofreda

    marcofreda New Member

    註冊日期:
    2010-10-12
    文章:
    12
    讚:
    0
    引用自http://forum.gibson.com/index.php?/topic/58164-the-distance-between-strings-to-you

    Here's how Gibson - Memphis does the final setup on their instruments. Its a post from Dave at Gibson:

    Hi I'm David the final inspector at Gibson Memphis. I can give you the factory spec info. on our setups. You will need a mechanics rule to do this properly.

    To check neck relief: fret the low E at the first and 15th fret (not 12th) reach to the 7th fret and tap string. There should be a small space between string and fret - no thicker than a piece of paper. Do the same with the high E.
    ACTION: fret low E at first fret and measure the distance from the bottom of the to the top of the 15th fret. It should be 5/64". Do the same with the high E, measurement should be 3/64". Now measure the string height at the nut; underside of the string to the top of the fret. Low E and A should measure 2/64", D and G =1.5/64" and B and high E = 1/64". If string height at nut is correct, recheck string height at 12th fret with strings open. Measurement for low and high E's should be the same as measurement taken at the 15th.

    Pickups: Fret low E at 22nd fret and measure pickup height from underside of string to point on pickup closest to string. Bridge pickup should be 3/64"
    (I think the 3/64" is a typo, it should be 3/32") , neck pickup should be 4/32". Fret high E at 22nd fret, distance for both pickups should be 3/32".

    Play test: Play every string at every fret checking for buzzes. Bend High E string 1 and 1/2 steps, beginning at the sixth fret and ending at 22nd, checking for "choking" and to make sure string stays in nut notch.
     
  16. lind0627

    lind0627 Member

    註冊日期:
    2006-06-30
    文章:
    156
    讚:
    0
    自行調整拾音器高度即可 鐵蓋中間的一字螺絲轉看看嚕!~
     
  17. XSEA

    XSEA Member

    註冊日期:
    2009-01-13
    文章:
    67
    讚:
    0
    我也來分享一下我的 第一把 Gibson

    這是我第一把 Gibson Les Poul Standard 2006年的琴!~~

    總覺的 我的指板 怎看起來比別人的還 淡呀....:confused:

    [​IMG]

    [​IMG]
     
  18. Dead Heart

    Dead Heart Member

    註冊日期:
    2010-02-08
    文章:
    232
    讚:
    0
    擦一點鴨子油不知道會不會比較好
     
  19. XSEA

    XSEA Member

    註冊日期:
    2009-01-13
    文章:
    67
    讚:
    0
    :eek: 鴉子油?
     
  20. Dead Heart

    Dead Heart Member

    註冊日期:
    2010-02-08
    文章:
    232
    讚:
    0
    Dr.Duck's AxWax AND STRING LUBE
    擦過一次,很不錯
     

分享此頁面