大家好 小弟最近從朋友那入手了一把捷克場的SPECTOR 可是跟網路上和其他人的琴感覺有點不同... 拾音器一樣是EMG-PJ 可是琴格上的點點不像其他人是貝殼形狀的那種... 我的琴都是小圓點 然後琴頭背面應該會有印字 可是我的沒有字耶 沒有字耶 沒有字耶 沒有字耶 這是讓我最困惑的地方~ 總不會是........假的= =? 還是有其他的原因?? 比較舊...之類的? 感謝大家幫忙解答
如果是這樣的話,你怎麼能夠確認它是捷克國家製造的呢? 我也曾經看過一把SSD bass,But...後來我發現它是韓國製造的bass。因為賣出的人,自己把製造國家的英文名字抹掉了。 所以我認為還是要謹慎一點比較好。有時候或許賣給你的賣家,自己也不太清楚這把bass的製造國家。 不管如何,如果你買的2手價位不高的話(15000元以下),那就算了!但是如果價位很高的話!那鬱卒的機會就更大了。 不管如何,希望你能幸運的買到理想中的good bass。
說不定連EMG都是後來換上的呢? 如果是1PIECE BODY配上DOT INLAY (沒有TOP跟BACK的分別.材質可能是整塊FLAME or QUILTED MAPLE或其他更普通的材料) 那應該可以確定是早期的東西 SPECTOR除了美場外不只捷克也有韓國.日本.大陸製的 你把PREAMP.PEG.琴橋.NUT和琴身用材等細節的照片PO出來 會比較容易得到解答
我把sdiou1985兄和kiwi203兄的疑問寄給Spector 並且附上kiwi兄的相簿 以下是Spector客服的回答 hello - thank you for the email. I am glad you are enjoying your Spector bass! yes this looks like a Czech made Spector bass. please note that we started production on these basses in 1994 and did not add our inlays to the Czech fingerboards until mid 1999. so yes the dots are correct. also 1990s models did not have any info on the back of the headstock. then a serial number was added inside the control cavity where the active tone controls are located. then the info including made in Czech Republic was added to the back of the headstock. evolution! since your bass has our "SS" Spector name and logo, AND dot fingerboard markers, I would say it was made in the first half of 1999. I hope this info helps. PJ Rubal Sales Director and Artist Relations SPECTOR 800.825.8810 National Sales Office 703.279.8075 Direct 845.246.0833 Fax spectorbass.com myspace.com/spector_instruments facebook.com/spector.bass