我找到你偷的來源了, 但發現你漏偷了下面這段重要的: >但若買Noiseless的來換到老Fender吉他上有個囉嗦的地方, 就是三個鈕的可變電阻都要換成 1 meg Ohm的, (原來的是500K), 那個電容器(Capacitor)也要換成 0.22 Mu的, 如果你買Fender原廠套件, 拆開包裝就是三個pickup + 3個可變電阻 + 0.22 Capacitor< <更正: 應為0.022>
单线圈的P.U明明都是用250KB的?????? 真的嗎? 你有研究了Fender Noiseless系列了嗎? 你去買組Fender Noiseless三顆套裝, 看附來的pot就知: http://www.fender.com.au/spa/pickups.shtml Vintage Noiseless Strat Want Classic Strat tone without the hum? With Fender's Noiseless technology, you can have just that! Made with staggered, beveled-edge Alnico 5 magnets, custom magnet wire and aged white covers embossed with a gold Noiseless logo, these pickups will make even the most cynical pickup aficionado sit up and take notice! Noiseless Strat pickups come with three 1-meg control pots, a .022mf capacitor and a 1 meg resistor. Experience crisp bell-like tones and crystal harmonics with the Noiseless Strat pickups! OEM on the American Deluxe Stratocaster
樓上的意思是vintage系列的 是裝250K 不是500K Noiseless不就是跟YJM那種一樣的方法嗎.... 也不能說不發聲吧 你給他反接還是會有聲音啊 就是讓下面那層PU發聲 消磁才是重點吧 另外 電容的部分0.1~0.01都可以試試看 差別在高頻 只是原場弄出來的阻值是設計師最喜歡的聲音罷了
Dummy Coil好像是說連磁鐵都沒有, 純粹為Hum Cancelling, 不會有聲音 那轉po原文指的老Fender, 不知他當時前文是否在講要換裝到Vintage系列? 如果是講Strat三顆都單的, 那大多是看到250k沒錯, 單單雙的話volume Pot好像就變成裝500K, 但講到單線圈還要分型, 像Jaguar上裝的也是單線圈, Pot卻1 meg和50K兩種, 其它P90, Jazzmaster那些Pickup也都是單線圈, 也好像都不是裝250K, 應該不能認為單線圈就一定是用250K